Sandblasting Across Ukraine
Mobile sandblasting and anti-corrosion protection at your facility. ISO 8501 compliance, Sa 2.5–3, nationwide service — without stopping production.
Before
AfterOur Services
Full cycle of surface treatment and protection
Cleanliness grades to ISO 8501
We select the grade for your coating and conditions — from standard preparation to bare metal
Thorough cleaning
Removal of loose mill scale, rust and old coatings. For standard conditions (C2), alkyd and epoxy primers.
Near-white metal
The industrial standard for most structures (C3): buildings, bridges, equipment, tanks.
White metal
For tanks, immersion and aggressive environments. Maximum adhesion and coating service life.
Pricing for works
Labour only · final cost after a site survey
- Abrasive cleaning (Sa 2.5)from 300 UAH/m²
- Cleaning to Sa 3from 380 UAH/m²
- Priming (1 coat)from 90 UAH/m²
- Enamel painting (2 coats)from 170 UAH/m²
- Tanks (interior)from 350 UAH/m²
- Turnkey anti-corrosion (Sa 2.5 + primer + 2 coats)from 480 UAH/m²
What affects the price
- Cleanliness grade (Sa 2 / 2.5 / 3)
- Area and total scope of work
- Height and access to the structure
- Type of protective coating
- Geometry complexity (trusses, profiles)
- Site location and distance
From 1,000 m² — up to 20% off.
Minimum order from 50 m². Materials are quoted separately.
Anti-corrosion protection and service life
We select the coating system to ISO 12944 — for your site's operating conditions
Primer-enamel (alkyd)
Mild conditions, indoor structures
Epoxy + polyurethane
Industrial facilities, open air
Cold galvanizing + epoxy
Aggressive and marine environments
How We Work
Request
Submit a request — we'll contact you within 24 hours
Inspection
Specialist visit, object assessment, accurate calculation
Contract
Terms agreement, contract signing
Execution
Equipment mobilization, work execution per ISO 8501
Acceptance
Quality control, acceptance certificate, warranty
Frequently Asked Questions
Do you clean with sand specifically?
Not only. We select the abrasive for the task — sand, nickel slag, copper slag or garnet. This achieves the required cleanliness with less dust. “Sandblasting” is simply the common name for the whole family of abrasive-blasting works.
How much does blasting cost?
Sa 2.5 cleaning — from 300 UAH/m²; turnkey anti-corrosion (cleaning + primer + 2 coats) — from 480 UAH/m². The final price is set after a site survey; from 1,000 m² there is up to 20% off. Materials are quoted separately.
What is the minimum order area?
From 50 m². For smaller volumes, contact us — we'll quote individually.
Do you work across Ukraine?
Yes. We have mobile equipment — we come to your site and work without stopping your production.
What cleaning standard do you provide?
We work to DSTU EN ISO 8501-1. We deliver cleanliness grades Sa 2, Sa 2.5 and Sa 3 — matched to the specific coating and operating conditions.
Do you provide a warranty?
Yes, from 2 years on the full cycle of works (cleaning + anti-corrosion protection). Coating service life is up to 25 years depending on the system chosen per ISO 12944.